Portable Cell Phone Signal Enhancement Stickers SP3 SP4 Network
Signal Amplifier
Our new generation X Plus Revised Edition Cell Phone antenna
boosters are better than ever! The antenna booster is now stronger,
and comes in a shiny gold color. It also comes with instructions on
how to install and test your new antenna booste.
The benefits:
1.Huge impact - like having a 4 foot antenna on your cell phone.
2.Improves reception, reduce static in boats, elevators, cars,
buildings, tunnels, and mountains.
3.Works on any analog, digital, and tri-band phones.
4.Eliminate dropped calls.
5.Easy to install, simply peel and stick to the inside of your
battery compartment.
6.Each booster is individually packaged ready to be given as a gift
or for resale!ne signal
7.These Boosters are not only used forCell Phones but also boost
the reception on Two Way Radios, PDA's, Walkie Talkies, Beepers,
and even Cordless Phones in your house.
Installation method:
Use a cloth to clean the area where the cell phone signal sticker
is attached. Then gently remove the signal enhancement sticker from
the jam, and stick the "UP SIDE" on the signal sticker toward the
antenna of the mobile phone. Just turn it on.
1. The principle of mobile phone signal stickers is to increase the
signal receiving range by lengthening the wavelength of the signal
received by the built-in antenna of the mobile phone
2. Wipe the back of the phone clean and find the position of the
earphone jack of the mobile phone (some mobile phone charging holes
are the earphone jack), that is the position of the main antenna of
most mobile phones, if the effect is not good, please change the
position of the diversity antenna (refer to the picture )
3. Tear off the white adhesive paper behind the signal sticker and
stick it vertically on the back of the phone, with the English
letters and the arrow end facing upwards (if there is a film on the
back of the phone that needs to be torn off, otherwise it will not
work)
4. Restart the phone after posting, most of the phones have direct
effects, and a small number of phones will experience signal
weakening for a period of time. This is a normal phenomenon. This
is the identification and matching stage of signal stickers for
some mobile phone antennas. See the effect after hours, if the
effect is not good, please try to restart several times or adjust
the paste position.
5. Please be careful during installation and use, do not rub or
break it with external force, please keep the signal sticker clean,
do not directly touch the front of the chip with your hands, and
the surface must not be stained with fingerprints or sweat
6. The material and thickness of some mobile phone cases will
affect the chip effect. Please wear a mobile phone case for
comparison. It is recommended not to use a mobile phone case when
using this product.
| Single package size: | 10X5X1 cm |
| Single gross weight: | 0.005kg |
| Package Type: | OPP bag |
| model | SP3/SP4/SP5/SP6 |
| Scope of application | mini wireless router |
| Source category | Spot goods |
| network standard | 3G 4G |
| Covered area | 10 square meters |
| speed | 150m |
| protocol | 802.11n |
| Processing methods | OEM |
| bill | Invoice not provided |
